You are operating a 16-cylinder diesel engine at 75% load, turning 900 RPM. All exhaust temperatures are between 900°F and 950°F, except the #3 cylinder, with an indicated reading of 750°F. All fuel rack settings are between 21 and 22 millimeters, with the exception of a 17 millimeter setting for the #3 cylinder. Which of the following corrections should be carried out?

In accordance with 46 CFR Subchapter F, steel tubing connections and fittings us...

The device shown in the illustration is a __________. Illustration MO-0008

Sacrificial zinc anodes are used on the saltwater side of diesel engine heat exc...

Most type(s) of microbiological growths in fuel are __________.

The function of device "O" shown in the illustration is to ______. See illustrat...

Irregular feeding or surging of the feedwater supply to a flash evaporator may b...

Carryover in a flash type distilling plant can be a result of __________.

The primary function of line 'J' shown in the illustration is to ______. See ill...

Standby or emergency diesel generator day tanks should always be kept full to re...

The depth of fuel oil in a tank is normally measured through the __________.